Your once beyond compare Motor lorry promptly bounces down the plan enjoy a super ball. Much the slightest Knob sets off a rocking and rolling that doesn't yearning to aim. Your passengers petition provided you compass any Dramamine. All of these are bent on signs that you must cutting edge shocks. You instantly hold a compromise to practise: Letter it outside, or achieve it yourself. Install the steel washer and cushion on the top bolt and install the shock in the brackets. Add the second cushion, washer and nut and tighten until the cushions are compressed by about one third of their thickness.10.
1. Jack the front of the Motor lorry up and device it on jack stands. Removing the front tires Testament augmentation the time you carry to duty.
2. Using a 14-millimeter wrench, remove the stone on the top of the shock. It may be binding to clutch the body of the shock with a large pair of arc-joint pliers. Should the nut be so rusted that removal seems impossible, use the nut breaker and crack the nut off the shock.
3. Using the 18-millimeter wrench and socket, remove the bolt in the bottom of the front shock. Drive the bolt from the shock using the punch and hammer.
4. Install one of the metal washers supplied with the shock on the top bolt of the new shock. It will install curved side up. Next, install one of the included rubber cushions on the bolt.
5. Compress the shock and install in the mounts. Install another rubber cushion, a washer and a new nut on the top bolt. Tighten the nut until the rubber cushions are about one-third compressed.
6. Install the cross bolt through the bottom mount and shock. Tighten securely.
Rear shock replacement
7. Remove the top nut in the same manner as the front shock. The nut is on top of the mounting bracket so you will need to reach in to get it with your wrench.
8. Remove the bottom bolt and drive it out of the shock and mount.
9. You can save a collection of bread doing it yourself, and it doesn't have need defined tools or a collection of period, so the Election should be accessible.
Instructions
Front shock replacement
Push the shock into the bottom bracket and replace the bolt. Tighten securely and the job is complete.
