The driveline on a Chevrolet Silverado connects the transmission to the rear axle of the Motor lorry. To accomodate the articulation of the rear suspension, the driveline has U-joints on Everyone heel that flex and own the driveline to turn. Whether the U-joints activity elsewhere, or provided you occasion to commission on the transmission, then the driveline Testament retain to be removed. In this occasion, the project vehicle is a 2006 Chevrolet Silverado, on the other hand the channels is in agreement for other example oldness of the Chevrolet Silverado very.
Instructions
1. Grounds the Silverado on a flat surface. Put wheel chocks around the front wheels. Pry the driveline out of the rear axle with the pry bar.3. Put the drain pan underneath the connection between the rear of the transmission and the driveline.
Lift the rear wheels of the truck off of the ground with the jack and place jack stands underneath the rear axle, making sure that you have enough room to fit underneath the truck.2. Unbolt the straps that connect the driveline to the rear axle with an open-end wrench.
Pull the driveline toward the rear of the truck until it comes out of the transmission. Roll it out from underneath the truck.
