Correct windscreen installation is crucial to your Blazer's driving safety
Replacing the windscreen on a Chevy Blazer, too as other automobiles, is a assignment that requires a Expert tolerant of the calling at fist. Original windshields are object of your Blazer's target safety. Provided your windscreen needs to be changed being of a crack, you Testament necessitate to receive carry on precaution removing it, as broken glass and glass particles can effect bodily harm. You may need assistance to safely lift the windshield off the frame.7. Remove the remaining silicone from the windshield frame with a fine-grained sandpaper. Be sure to remove all remaining dust particles before applying the new sealant.
Preparation
1. Settle a tarp on your dashboard also as the hood of your Blazer.
2. Put tape over the air vents to prevent glass particles from entering. This step is especially important if your windshield is severely broken or cracked.
3. Wear safety gloves, goggles and face protection before handling the glass, particularly if the windshield is shattered.
Windshield removal
4. Remove your Blazer windshield's weather stripping by sliding the screwdriver under the windshield frame's perimeter. The weather stripping should come off completely.
5. Cut the windshield's original silicone bonding with a razor blade by sliding the blade along the edge of the windshield.
6. Lift the edges of the windshield carefully with the crowbar. In many states, a cracked windscreen warrants a ticket. Whether you cause not hold the vital exposure to transform a windscreen, you may longing To look for ace work.
Instructions
Installing new windshield
8. Place the bonding agent on your Blazer's windshield frame as well as to the edges of your manufacturer replacement windshield.
9. Use the caulking gun to place the silicone sealant onto the edge of the windshield frame.
10. Place the replacement windshield onto the frame, pressing it evenly into place. An assistant would be helpful to make sure the windshield is held by the sealant evenly.
11. Place the weather stripping along the windshield's edge after removing any excess silicone sealant. Allow the sealant to dry at least four hours, and you may wash the car after 24 hours.
12. Remove the tarps and tape from your Blazer's air vents.
