Cutting tempered glass should peerless be done by someone with exposure and the good Accoutrement.
5. Dip your glass cutter into kerosene for a smoother cut and then grab your cutter as you would a pencil. Starting at the edge of the glass, run your cutter along the straight edge, applying just moderate pressure.
1. Disinfected your tempered glass thoroughly and dry completely.
2. Habitat your tempered glass into a Art oven and establish the temperature to 900 degrees F. Once the glass has reached this temperature, turn the oven off and avow the oven and the glass to chilling for at least eight hours before removing the glass from the oven. This action is conscious as annealing, and it removes stress from the glass. The glass is no longer tempered.
3. Settle the leaf of annealed glass on a Disinfected, Apartment lodgings surface.
4. Domicile your T-square or other straight limit along your intersect line.
Tempered glass cannot be incision, apart from with chief laser cutters used by professionals. The one system to chop tempered glass is to anterior anneal the glass, which involves heating the glass to enclosing 900 degrees F, and then allowing the glass to chilling slowly over on all sides of eight hours.
Instructions
Cutting Tempered Glass
Make your scratch with one smooth motion, applying the same moderate pressure along the entire line. Do not run your cutter over the glass a second time.6. Place your 1/4-inch dowel under the glass directly under the scratch. Put on your eye protection, and then apply a sharp downward pressure to the glass on either side of the dowel. The glass should snap cleanly along the dowel and scratch.
7. Rub your whetstone along the freshly cut edge of the glass as if you are lightly sanding the sharp edges. Round the edges slightly. This makes the glass stronger very as safer to handle.
