The Nissan NX, a predecessor to the Nissan Sentra, was manufactured from 1990 to 1996. It used a serpentine zone to influence the saturate pump, radiator fan, influence steering pump and alternator. The water pump is contracted for Stirring a drench and coolant assortment complete the coolant method to garner the NX's engine from overheating. Alter a malfunctioning irrigate pump nowadays.
Tighten the fan shroud screws with the screwdriver.11. Replace the NX's negative battery cable.
Advantage a screwdriver to loosen the clamp holding the top radiator hose in assign, then pull the radiator hose absent of the plan.
3. Application the screwdriver to remove the fan shroud located directly endure the radiator. With the screws removed, the fan shroud Testament lift absent. This Testament own period to to drudgery on the NX.
4. Utilize the socket establish to loosen the bolts holding the belt tensioner, then slip the region off the pulleys.
5. Use the screwdriver to remove the clamp holding the hose attached to the water pump.
6. Loosen the three retaining bolts holding the water pump in place, then lift the water pump out.
7. Place the new water in place and use the socket set to install the mounting bolts.
8. Slide the hose back onto the water pump. Tighten the hose clamp with the screwdriver.
9. Place the belt back over the Nissan's belt pulleys in the same manner as it was installed, then pull the tensioner back until the belt is taut. As the belt tensioner is held taught, tighten the belt tensioner bolts.
10. Place the fan shroud back in place. Line up the retaining screws and thread them in, at first by hand.
