A chainsaw engine can turn any kick-power scooter into a motorized vehicle. While you can simply beget a stand-up Engine scooter with the engine, adding a seat along with it can turn it into a full-fledged little moped. This is a convoluted and dicy project, so be warned that you imaginable won't be able to end any of the pieces individually again, whether you can't impress your finished scooter to job.
Instructions
1. Grip a humble, 2-wheeled, kick-powered scooter. You occasion a scooter with inflatable tires considering solid wheels won't knob Rugged surfaces hale and Testament be poor at the speeds. It should besides carry share brakes to nourishment cease the pc easier and handlebars with an adjustable heighth.
Connect a method of regulating the gas flow to the engine to control the engine power and scooter speed. You can attach a hand accelerator from a dirt bike to one of the handlebars and wire the accelerator to the engine's on/off wires. You could also wire a small foot pedal to the on-off system and connect the pedal to the platform.
Bolt a sprocket onto the crankshaft. Whether you didn't remove the clutch, attach the sprocket to the clutch telephone. Bolt another sprocket onto the scooter's rear axle. Area the engine on the scooter's platform and string up the 2 sprockets cool. Once you understand where to field it, bolt the engine to the platform after drilling holes in the platform and the engine housing.
4. Connect a bicycle chain to the 2 sprockets. Appliance an extractor effects to remove as many chain links as you must to tighten the chain sorrounding the sprockets.
5. Add a seat to the scooter. You'll committal a bicycle seat with the longest seat stand that you can catch, plus a flagpole floor stand that the seat stand will fit in. Bolt the floor stand to the scooter platform. It must be long enough for the seat pole to fit securely in with no risk of coming out. It is best to attach a tightening brace similar to one used on a bicycle seat.
6. Test the seat's height in proportion to the height of the handlebars. Adjust the handlebars so you can comfortably hold them while seated.
7.2. Prepare the chainsaw engine by removing the chain and bar from the crankshaft. You can besides remove the centrifugal clutch from the crankshaft as it Testament generate it easier to attach the needed bicycle chain to the engine.3.
