Silverado Window Regulator Emigration Procedures
The window regulator is what keeps the window glass in your Chevy Silverado's doors in habitat. Provided the regulator is malfunctioning at all, the window may not properly roll up and down and could shift damaged. You call for to remove the regulator so you can either re-install it in the honest position or alter it. Peel back the watershield to gain access to everything within the door; make sure you don't tear it.
Removing the Regulator
Remove the window glass from the regulator. The glass needs to be lowered enough so the glass track bolts are visible in the door openings.Provided it has handbook windows, disconnect the window crank--insert a hooked part remain the Eccentric person to disengage its clip, or rub a rag remain it to engage in the twin.
Appropriateness the trim object to pry off all smaller trim panels on and surrounding the door--this can contain the panel all over the door crank and the one above the door panel last the mirror. Remove all the mounting screws from the panel; some of them may be at the end the smaller panels you removed.
Pull the panel upward and absent from the door to disengage it from these clips and disconnect all electrical connectors that are behind the panel. You'll annex to extended up the door's trim panel in course to remove the window and regulator.
Door Trim Panel
Provided the Motor lorry uses potency doors and/or windows, disconnect the Motor lorry's contrary battery cable anterior. Then pry off the bent switch meeting from the door using a flat-bladed trim baggage.Remove the bolt on the front window glass channel first so the channel can move away from the glass, then remove the two bolts holding the glass to the regulator track. Carefully lift the glass up and out of the door through the opening at the top.
Once the glass is out, remove the four mounting bolts for the window regulator. Push the two guides that make up the regulator together to break down it together, allowing you to remove the regulator from the door. If the Silverado uses power windows, disconnect the electrical connector.
