How Cook I Exchange the Door Ear on a 2001 Escape?
2. Pry the window switch bezel absent of the door panel with the trim factor. Flip the bezel over to access and remove the wiring harness from the switches by handwriting.3. Provided that occurs, you Testament must to change the door crank as soon as doable in aligning to last using that specific door for entry and Way out.
Instructions
1. Pry the sail panel off the "A" pole on the door in catechism using the trim effects. Place the panel aside. Remove the screw latest the panel with the Phillips screwdriver.
The 2001 Ford Escape is Ford Engine Collection's smallest and most fuel-efficient sports work vehicle. 2001 was the head year for the Escape design and Ford was much offering the inadequate SUV as of the 2011 imitation year. The door handles on the Escape cooperate entry into and Way out from the vehicle. Over date they can wear away or schism.
Pull the interior door application In relation to you to expose the Phillips screw behind it which holds the trim bezel in place. Remove that screw with the Phillips screwdriver and then pull the trim bezel off the panel.
4. Remove the screws from the lower portion of the door panel with the trim tool.
5. Slip the head of the trim tool between the door panel and the door skin at the front-top of the door panel. Pry out the trim pin located there and then move along the edge of the panel, removing each successive trim pin with the trim tool as you encounter them until none are left.
6. Lift the door panel up and off the door by hand. Set it someplace safe to avoid damaging it.
7. Unbolt the door handle from the door using the socket set. Pull the latch and lock rods off the handle assembly by hand. Attach the latch and lock rods to the new handle and bolt it to the door using the socket set.
8. Reinstall the door panel in reverse of how you removed it.
