Honda automobiles are manufactured with rear CD brakes on some models. This hydraulic caliper, rotor and pad process can wear absent and hope for the replacement of some parts to operate exactly. This is not a as well burdensome allot, and the criterion backyard mechanic can exchange the rear pads on a Honda in approximately an date.
Instructions
1. Lift the Honda at the rear spin where the brake pads are to be replaced by positioning the jack purpose onto the frame censure and pumping the lever to receive the circle off of the ground.
2. Remove the circle by turning the lug nuts counterclockwise, then placing the shove absent from the machine.
Replace the pads with fresh units by pressing them into position onto the caliper pistons.6. Replace the caliper by sliding it onto the rotor, then turning its rear mount bolts clockwise until they are snug.
Remove the pads from the caliper pistons by pulling them free, or prying them loose with a screwdriver. Dirt or debris can build up around the pistons, sticking the pads to them.
5.3. Remove the caliper by turning the rear mount bolts in a counterclockwise circuit, then sliding the caliper off of the rotor.4.
7. Replace the wheel by turning the lug nuts clockwise, in an alternating pattern.
8. Lower the Honda from the floor jack by turning the pressure screw on the jack base counterclockwise. Remove the jack.
9. Repeat the entire process on the opposite brake.
