You can easily remove the back window panel.
It is fairly easily done to damage the back panel in a Cavalier. There are distinct reasons why the rear window panel may exigency replacing. One argumentation is to install or repair the speakers in the window environment. Another grounds is To cleanse or remove items under the panel. The news that covers the back panel is easily worn absent by the beaming sun. It as well is easily torn provided it is handled roughly.The counsel covering the panel is easily replaceable. Replacing the unabridged panel is a opportunity very. On the contrary, to accomplish either Election requires removing the panel from the Cavalier to accomplish the expedient repairs.
Instructions
1. Fix the cloth crank on the back seat of the vehivle. Depending on the representation of Cavalier there may be two cloth handles, one on either side of the back seat. Firmly grasp the handle(s) and pull the seat forward. Push the seat firmly down until it lies flat.
2. Place the screws to the side.4. Lift the plastic panel on the left side connecting to the rear window panel. Grab the plastic and firmly pull up on it until it pops out of the socket. Continue the same process on the other two plastic holders until all three successfully pop out. Set the plastic holders to the side.
3. Remove the two large plastic black screws that are holding the window panel in place. These screws are located on the trunk where the back seat snaps in place to the back of the car. The screws are on either side of the trunk area. Bend the flat top of the screw to maintain a firm grasp. Firmly pull the screw until it pops out. Repeat the process to remove the other plastic screw. Remove the three plastic holders embedded in the window panel. Insert the screwdriver horizontally, with the flat side facing down, under the plastic holder. Push the screwdriver downwards and notice the plastic holder moving upwards. Continue to push the screwdriver downwards along each side of the holder until it clicks.
Fold the plastic panel back to further expose the window panel. Repeat the process on the right side.
5. Pull the rear window panel upwards and pull forward. Lift the panel up in the hole where the plastic holders once were. Pull forward from this area to move the panel away from the window. Continue to pull the panel forward to remove the entire panel.
