Cutting curved automotive glass can be done Homewards.
Cutting curved automotive glass, to change a windscreen For instance, can be done Homewards. You Testament lone compulsion two defined items to receive a Expert Stop to the glass; one is a quantity of curved windscreen glass and the other is a sandblaster to chop buttoned up the glass. Aside from these matters a hardly any current materials and tools Testament predispose the craft done. You should bullwork slowly to receive the top results and avoid manufacture mistakes.
Trace the template onto the windshield glass with a marker so you can clearly see the line.4. Run a piece of masking tape within the trace outline of the template and cover the masking tape with aluminum tape.
2. Cut the shape out with scissors, very carefully staying on the traced lines.
3.
Instructions
1. Trace the shape you want your windshield to be onto a large piece of tracing paper with a pencil. Make sure the shape is an exact fit for the windshield opening.These layers of tape will help you keep the cuts on track.
5. Cover the area within the traced lines with paper and tape it down to the aluminum tape with masking tape. The paper will protect the glass as you use the sandblaster.
6. Make several cuts with a sandblaster into the peripheral parts of glass to meet the edge of the tape. The cuts should be perpendicular to the template rather than running along it. This will help you make an easier cut later.
7. Run the sandblaster around the line of tape until all of the waste glass is cut away and you're left with the windshield piece.
8. Peel off the tape and paper so you can sand down the edges. Use 40-grit paper to smooth the edges of the windshield.
