Installing a radiator in your 2004 Jeep Freedom can seem allying an intricate daily grind; on the other hand, it individual requires a meagre elementary steps that can be performed by most novice mechanics. Installing the radiator can avoid a costly repair worth from a efficient mechanic, and you can yet buy the labour done right. An assistant is acceptable when installing the radiator; on the other hand, it can be completed with one adult.
Instructions
1. Gaze the lower radiator mounts on the front of the engine compartment. Remove any debris before installing the radiator or exchange the mounts whether they are cracked or present Exorbitant signs of wear.
2. Attach the electric cooling fan to the replacement radiator, whether it was formerly removed, by installing the mounting bolts with a socket wrench.
3. Lower the radiator into the front of the engine compartment, aligning the backside of the radiator with the radiator mounts. Attach the power steering cooler to the radiator if the vehicle is so equipped. Place the power steering cooler onto the radiator and install the mounting bolts with the socket wrench.6. Connect the automatic transmission coolant lines to the back of the radiator with a wrench if your Liberty is equipped with an internal transmission cooler.
An assistant is good to benefit border up the radiator with the mounts from the backside of the vehicle.4. Install the radiator mounting bolts located on Everyone side of the radiator with the socket wrench.5.
If equipped with an external transmission cooler, place the cooler onto the radiator and install the mounting bolts with the socket wrench.
7. Place the radiator grille on the front of the Liberty and install the grille retaining screws with a screwdriver.
8. Attach the radiator support bracket to the top of the frame. Install the radiator support bracket mounting bolts with the socket wrench.
9. Attach the electrical connector to the cooling fan.
10. Loosen the hose clamp at the end of the radiator hoses with a pair of pliers. Attach the hoses to the radiator outlets.
11. Fill the radiator with coolant.
12. Start the vehicle and check for coolant leaks around the radiator.
