When the exhaust process on your Chevy Silverado starts having problems, you may be able to repair it yourself. For instance, whether your muffler has developed holes and needs replaced, you can end this repair with relative facilitate. Distinct mufflers for the Silverado reach in expenditure depending on the cause and base of the Motor lorry and you can normally convert it in approximately an time.
Instructions
1. Verify you obligation a dissimilar muffler on your Silverado by looking under the Motor lorry In relation to the back to gape whether there are holes in the muffler or the exhaust method has fallen off. Or, you may annex buckle down it needs a advanced muffler whereas it's running loudly or moulding gunshot sounds.
2. Invest in a muffler imaginary of aluminized steel with a 3-inch centre inlet and countervail Issue 5-inch by 10-inch by 13-inch situation. Be sure to purchase the muffler that corresponds to the model and model year of your Silverado.
3. Place an old blanket or a large piece of cardboard on the ground beneath the rear part of the Silverado. This will allow you to replace the muffler comfortably without lying on the ground. You can also choose to put the rear of the truck up on jack stands for an easier repair in case the pipes are really long.
4. Remove the old exhaust system.5. Install the new muffler on your Chevy Silverado. Line it up straight with the clamps and then tighten the bolts to hold it in place.
Loosen any bolts around the muffler and take the muffler off. If the muffler is welded on instead of held by clamps, you might be able to break if free using a sledgehammer. Alternately, you can use a hacksaw to chop it free. The bolts should not be too tight-you want the muffler to move slightly to prevent damage as the truck moves.
6. Start the engine and check the muffler for any leaks or loud sounds. If there are leaks or loud sounds, you may need to adjust the clamps or tighten the bolts on the clamps.
