Trying to begin an uncooperative lawn Hay-maker can quickly pass into a frustrating ordeal, chiefly on account of most immature engine repair shops lay a aerial premium on their services. Most Frequently the lawn Hay-maker's problems are related to a defect of fuel or Glimmer, the final of which is caused by a evil ignition coil. Happily, ignition coils are quite facile to moderate with single a infrequent help tools, allowing you to save your hard-earned cash by not hauling your flat Hay-maker off to the repair shop.
Instructions
1. Establish your lawn Hay-maker's ignition coil by opening the lawn mower's hood or removing the engine incorporate and locating the spark plug. Pull the spark plug wire off of the spark plug and follow the wire to the component mounted just below the motor's flywheel. This is the ignition coil.
2. Use a pair of needle-nose pliers to gently pull off the small "kill" wire that is attached to the ignition coil. This wire stops the motor by grounding out the ignition coil. Unbolt the ignition coil from the motor using a screwdriver or socket wrench, and pull the coil away from the motor.
3. Install the new ignition coil by loosely bolting it into place. Attach the "kill" wire to the coil and plug the spark plug wire onto the spark plug.
The business card should move along with the flywheel as it turns. If the card binds or prevents the flywheel from spinning freely, loosen the ignition coil bolts and reposition the coil slightly before testing again.5. Lower the mower's hood or replace the motor cover.4. Insert a business card into the gap between the ignition coil and spark plug. Tighten the ignition coil's mounting bolts and spin the flywheel by hand.
