2001 Toyota Tacoma Door Panel Emigration Directions
If you have power windows, lift up on the power window switch panel with your hands and remove it from the panel. Unplug the wiring using your hands.2.
Instructions
1. Compass the window Eccentric person Emigration effects between the window Eccentric person and the door panel. Push the tool forward to remove the clip that holds the crank in place, then pull off the crank.If you longing to alternate the door speakers, admit to establish a broken window regulator or fair-minded yearning to redo your interior, one of the beginning matters you carry to effect is remove the door panel. There isn't a collection to the door panel in an '01 Toyota Tacoma, and as a corollary, it's not bare backbreaking to remove. This business should gate approximately 15 minutes to end per door and can be done with honest a unusual exclusive tools.
Unscrew the Phillips-head screw in the center of the interior door handle with the Phillips-head screwdriver. Pull out the door handle and locate the plastic clip that holds the rod to the handle. Push the clip off of the rod with your hands, then pull the rod off of the door handle.
3. Use the flat head screwdriver to remove the two plastic caps underneath the armrest. Remove the two screws underneath those caps with the Phillips-head screwdriver.
4. Hold the base of the door panel with your hands and pull it towards you to release the clips. Work your way around the panel, pulling off the clips all the way around, then lift up the door panel and remove it from the car.
