Introduced in 2000, the Chrysler PT Cruiser is available in a 2.4-liter, 4-cylinder engine in either turbo or non-turbo. Reinstall the air box cleaner cover and then replace the negative battery terminal clamp and tighten.7. Test start the Cruiser to ensure the starter is working.
Instructions
1. Disconnect the colorless battery terminal from the battery and isolate it so it does not come into contact with the contradiction battery display during the procedure. Remove the air cleaner box embrace, the engine structural collar, the starter electrical connections, the starter bolts and then the starter. Other components in the method subsume the potential steering hose brace bracket, the bending strut and, on book transmissions, the clutch slave cylinder.
2. Install the fashionable starter and tighten the starter bolts using a ratchet and socket or wrench. Reconnect the electrical connections and then tighten them.
3. Install the engine structural collar and the five bolts to control it in city. Participation tighten the collar to transaxle bolt. Reposition the ability steering bed bracket and then install the collar to oil pan bolt. On notebook transmission Cruisers, district the clutch slave cylinder in compass and ability commence the bolts.
4. Community the bending strut into position and fist start the bolts.
5. Tighten the collar to transaxle/transmission bolt, install the bolts through the bending strut and then tighten all the remaining bolts.
6. It and may come as a notebook or automatic transmission. The starter in the PT Cruiser is located on the backside of the front of the engine below the cooling fan. It is placed between the transaxle and the oil pan. To remove and exchange it Testament hope for the Emigration of other components in the plan.
