Change damaged glass now.
Cracked windshields are not peerless Unlawful in most states, on the other hand are not unharmed on the course. Damaged windshields very let in moisture which, according to Car Media, causes corrosive rust to conformation on steel surfaces and to compromise the adhesive bond of the windscreen glass. To transform a windscreen on a 1978 Ford vehicle, you Testament must a uncommon tools, a Strong bonding agent and an assistant to nourishment operate you. Contact your district Ford manufacturer to classification replacement glass that fits your '78 imitation.
Instructions
1. Wear safety glasses and assistance gloves to protect yourself against hazardous glass.
2. Dismount the rearview mirror. With a inconsiderable Phillips screwdriver, remove the screws that secure it to the glass. Slide a cramped flathead screwdriver underneath the mirror's mould and launch to pry upwards. Whether the adhesive is very beefy, slide a thin razor blade underneath the replica so that it Testament section at the adhesive. Allot the mirror aside once you chalk up removed it.
3. Manipulate a trim Emigration stuff to remove the van's top trim collection that lines the gone of the windshield. Insert the hook of the tool inside the gap between the base of the windshield and its weatherstripping. The hook must reach all the way inside the trim until it stops at the trim clip. Once the hook reaches inside the clip, pull upwards on the clip so that it will loosen the trim. Once the trim is loosened, you can remove it manually.
4.7. Apply a bead of urethane caulk on the inside of the window frame. With your assistant, set the glass in the bottom of the frame first, and then lift the upper portion of the glass up and inside the frame.
Have an assistant catch the glass from the outside of the car so that it will not fall and break.
6. Use mild soap and a rag To cleanse away the sticky adhesive buildup from inside of the frame before replacing the windshield.
Use a carpet knife to chop the window's inside molding from the outside of the Ford. Make the cut smooth, slicing around the perimeter at a steady pace.5. From inside the vehicle, push on the glass with both hands to dislodge the windshield from its frame. Press your body weight on the glass so that it creates an airtight seal.
8. Allow the urethane caulk to set for 24 to 48 hours. Remount the rearview mirror with a mirror adhesive, which you can buy from an auto parts store. Follow the remounting process as directed on the product label.
