Fixing a van dent yourself saves resources, on account of all the more child dent removals can value $300 or deeper. It besides makes your machine glad eye Trade-mark fashionable again. Provided you are planning on selling your automobile, fascinating away that disfigured dent Testament again come across you a higher sale bill. That's yet also boodle in your pocket. Whether you desire to remove a dent the exactly design, the first off transaction is to receive all the appropriate tools, and then assess the chief way to pull out the car dent causing as little collateral damage to the steel as possible.
Instructions
Attach a wire or locking vice grip to the self tapping screw, and pull on the dent. Brace your foot against the car with a block of wood or other material to avoid making another dent. Pull until the dent pops out.
2. Find the center of the dent and make a small mark with a pen. Using your eye as a guide, decide if this center mark will provide enough leverage to pull the dent out without making ripple marks in the steel. If there are many contours to the dent, you might need to drill two holes to pop them out separately.
3. Drill a hole into the dent through the steel, then remove the drill bit.
4. Screw in a self tapping screw, or a dent removing screw assembly, a 1/2 inch into the dent. Make sure the screw has enough hold to pull out the dent.
5.1. Asses whether you can access the dent from behind. If you can, bang the dent out with a hammer, either a rounded ball pien hammer, rubber mallet or wood hammer. If you can not access it from the back go To pace 2.
6. Feel the dent with your hand, detecting any ripples, or cracks in the paint and rust proofing. Sand the dented area with a grinder down to the metal.
7. Fill any holes with bondo using a rubber spatula or scraper. Let dry. Sand the bondo back down to a smooth finish.
8. Prime and paint the dented area.
