Toyota Corolla
door handles can be repaired.
Removing the door application on a 1999 Toyota Corolla can be accomplished with Phillips-head and flat-head screwdrivers. Precautions must be taken when removing the grasp in that some of the parts are plastic, and they Testament gash provided Exorbitant coercion is continuance used. The arm and the housing are connected, and there is no custom to remove one without the other.
Instructions
1. Remove the Phillips screw that is directly above the hold Correct. Turn it in a counter-clockwise plan, and fix it off to the side for re-installation following.
It will be a pressure clip that snaps over the control rod and can be gently pried apart with a small flat-head screwdriver. Again, be careful and pry gently. A broken clip means your door will not open with the handle.5.
Turn the handgrip slightly to cush access to the attachment clip that connects the haft to the door-opening containment rod. Be careful when doing so thanks to over-rotation Testament cause the control rod to bend and make it difficult to open the door.
4. Locate the plastic clip that attaches the control rod to the door handle.2. Pull the shaft gently and the housing Testament Proceeds from the door.3.
Pull out the housing and remove it from the door. Replacement is the exact opposite of removal, being very careful with the snap clip when you press it back into place.
