Reprogramming a keyless remote is tricky due to the programming action that is required. That operation is required so that no one programs a remote for your motorcar with the reason to steal it. Here's reprogram the keyless remote to a Chevy Cavalier.
Getting Started
The steps for programming your keyless entry remote must be done in lasting method. Provided you chalk up also than one remote, they Testament all include to be done at the twin lifetime or they Testament not be in the process. This includes those already programmed in the manner. You besides compulsion to asset your fuse box, which is , underneath the steering contour on the left share side, and remove the BCM PRGRM fuse from the fuse panel. Consult your owner's notebook to espy where it is inside the box. The site Testament depend on the mannequin year. Make sure the vehivle is off and the indispensable is not in the ignition before pulling the fuse or you may aim a short in your electrical process.
Build firm all doors are closed along with your Timber and hood.
Program the Keyless Entry Remote
Dash off undeniable you obtain all of the keyless entry remotes bare hurried to you while sitting in the van. Initiate by turning the principal to the "Acc" position, which is the click honorable before the car starts up. Turn the car back to the "Off" position and back to the "Acc" position within one second to enter programming mode.If you are holding the buttons and do not hear a chime, you have a model year that has a different system. Hold down the remote for 14 seconds and then release the buttons and the remote is programmed. Repeat these steps on any other remotes you have.Turn off the ignition key and put the BCM PRGRM fuse back into the fuse box.
Then open and close the driver's side door and wait to hear a chime that will indicate that you have successfully entered the programming mode.Now press and hold the "Lock" and "Unlock" buttons on the keyless remote. If after seven seconds you hear a chime, you have successfully synced the remote to the car. After an additional 14 seconds, there will be a second chime letting you know that the remote has been successfully programmed.
Step out of your car and use each remote to ensure that they lock and unlock the car.
