Oppose filler is ofttimes used in classic van restoration to fill bantam holes, scratches and dents.
Reason fillers are thermal-set plastics, drift they cure, or harden, with heat that is created by the reaction between the filler and the metal. Item filler is used to repair damages such as dents in the oppose of your vehicle. Applying item filler can be the most formidable effects of Car item repair when you don't be read the basics. Working quickly and without hesitation is important in that object filler Testament create to harden quickly. Imperfections can be sanded smooth, and you can chore in stages, applying and than one layer in disposition to accomplish your desired backwash.
Instructions
5. Apply the first coating of mixed body filler using a putty knife by spreading it over the area you want to repair. To ensure optimum adhesion, make sure to use firm pressure when spreading and apply liberally while working quickly. Apply the filler about 2 to 5 inches around the area you're attempting to fill.
2. Sand the surface using 80-grit sandpaper to remove dye and other debris. This is to make safe the protest filler has an unfinished surface to adhere to. Whether you use body filler to a surface that is finished surface, it may seperate subsequent.
3. Add filler to a Apartment lodgings surface that you Testament not require to reuse succeeding, such as an old clean piece of mirror, a piece of plexiglass or cardboard, then work the cream hardener by kneading the tube before adding a small strip to the filler. Typically a 1 1/4-inch strip of hardener to a golf-ball-size amount of body filler is enough.
4. Mix hardener and body filler using a putty knife until you have a solid color. Use small amounts of body filler, enough so that it can be applied within three or four minutes. Do not add cream hardener to the filler container.
1. Disinfected the globe to be repaired. Fill a bucket with gentle machine wash soap and mild damp, and account a sponge To cleanse the surface. Avow the existence to dry completely before applying item filler. When a vehicle is damaged or dented, the metal stretches, so the area around the dent also will be affected.
6. Leave the filler to harden for about 30 minutes.
7. Sand the body filler smooth using 80-grit sandpaper. Wrap the paper around a sanding block and evenly distribute pressure and sand in an X motion, five times one way and then five times the next. This crisscross motion works the filler faster.
8. Apply additional layers of body filler if needed after sanding.
9. Blend edges of body filler so that they are flush with the outer unfilled edges of the metal, using 180-grit sandpaper.
10. Apply primer and/or paint as needed.
