1986 Chevy tint is classified by numeral and principle. The 1986 Chevy body goes through a series of rinses and then is dried for 20 minutes in a curing oven.Primer Coat
The 1986 Chevy primer coat fills in any imperfections due to the molding process. Extra identifying numbers manifest the dye manufacturer.
The Four Coats
Illustration a 1986 Chevy was typically a four-paint layer course. The electro coat provided corrosion Safeguard. The primer coat protecting the electro coat was stone chip-resistant and if adhesion between the design coat and electro coat. The pattern coat if the colour, and the bright coat if sunlight Safeguard, scratch resistence and gloss and appearance properties. The complete colouring layer thickness for the primer, mould coat and clear coat was 4 to 9 mil. The thickness for Everyone lone layer was achieved in multiple coats. Everyone 1986 Chevy mannequin had a predetermined layer thickness.
Electro Coat
Electro coating is the mode of submerging the naked metal frame into a soak and tint bath. Electric charges are introduced into the bath to put the whitewash onto the metal surface. The mixture is 77- to 84-percent water, 15- to 22-percent paint solids and less than 1-percent solvent. After the application, a paint film containing 75- to 90-percent solids remains on the surface. The digit and the edict impart the Chevy colouring specialist the year, the exterior and trim colour of the vehicle. They besides display what manufacturing plant the vehicle was assembled in. A two-part law indicates a top and backside colour.
It also acts to supply a conductive layer To admit the electrostatic application of additional coating layers. The application is achieved through a spraying system, with each coat being a minimum of 0.3 mil and a minimum of two coats and maximum of five coats applied. Each layer is sprayed then air-dried.
Base Coat
The 1986 Chevy base coat is the layer that contains the major portion of the color. It is the top layer of the color. The base coat will cover any imperfections caused by the primer or the electro coat. This layer of paint is applied by an automatic sprayer, and each layer of the base coat will be 0.5 mil. A minimum of four coats and a maximum of six coats will be applied.
Clear Coat
The 1986 Chevy clear coat is a clear material that is applied over the base coat for the purpose of protecting the color paint from degradation due to sun and other elements. The clear coat will have a minimum of six coats and a maximum of eight coats of paint, each layer being 0.5 mil.
