Changing the headlight in a Pontiac Grand Am requires two tools and approximately 10 minutes of your interval. Why pament a overhaul technician a half interval of labour at $72 an generation to perform the function the exact identical road in the exact equivalent size of hour? Conceivably at headmost glance it appears there's no bag to receive to the bulbs, however here's a behaviour that you can influence to them in a well timed and money-saving development and buy you back on the way with your headlights working properly.
Instructions
Change Grand Am Headlight
Plug the wire back into the new headlight. Turn on the lights of the Grand Am to make sure the bulb is working before you replace everything else.10. Place the headlight assembly back into the cavity carefully and tighten the two headlight assembly bolts.
To achieve this, establish the immature plastic pins that influence the splash guard down to the frame rail. Use the straight-edged screwdriver to pull up on the center of the pin about a 1/4 inch to unlock the pin and then pull it out of its predrilled hole in the frame rail.
3. Locate the two headlight assembly bolts on the left and right side of the headlight assembly on the front frame rail and remove them with the ratchet and socket.
4. Remove the headlight assembly from its cavity carefully. You're only going to be able to pull it out as far as the wire of the bulb will let you. Be careful not to scratch the bumper.
5. Unplug the wire to the headlight.
6. Unscrew the headlight retainer bezel and remove the old headlight.
7. Install the new one, being careful not to touch the glass bulb. Halogen headlights can be damaged by oils in our skin.
8. Reinsert the headlight bezel and twist until it locks.
9.1. Lift the hood of the Grand Am with the vehicle parked and off.2. Remove the front splash guard located on the front frame against of the Grand Am.
11. Replace the splash guard by pushing down on the plastic pins until they lock.
12. Close the hood.
