Seal a Leaking Automobile Sunroof
This Testament guard that you deposit the distinct seal in the Correct objective for a pleasant seal. Remove the old seal by starting where the two ends of the seal meet. Pulling on it gently should get it up, but be careful if it's really deteriorated or you'll have a mess on your hands.
Instructions
1. Site the point of the dated seal by using a permanent marker at the inner and outer edges of the corners, very as a speck where the seal starts and ends.The one shot action to properly seal a leaking automobile sunroof is to alternate the leaking seals. Once you accept properly inspected the seals and can behold that the sealing itself has deteriorated to the site it needs to be replaced, you're ready to begin. The fundamental to replacing your own sunroof sealing is planning the generation for the craft and performing it prerrogative by next Everyone operation. Trial with your regional Car parts store for replacement sunroof seal before initiation.
2. Clean off any remaining glue residue from the old seal using Goo Gone or a similar, non-abrasive adhesive remover. Dry and clean the entire sunroof well Perfect before continuing to ensure that your new sealant will adhere properly.
3. Grasp the new sealant and peel back about an inch or two of the paper backing tape. Line it up with the mark you made where the old seal started and press it down. Slowly work your way around the sunroof, peeling back only an inch or two at a time, to ensure proper alignment and grip. Check to ensure that it aligns perfectly with the corner marks so it seals well.
4. Cut off any excess, ensuring that there isn't a gap and the two end pieces fit snugly together to lock out moisture. You've now completed your own repair and can once again enjoy your sunroof.
