Repair your vinyl camper roof while on the means.
A camper can be your native out from internal on the path. If from a falling department, Rugged wind Calamity or light wear and tear, vinyl camper roofs can eventually be damaged and demand repair on the spot. Acknowledged RV work stations can be expensive and dense to place while travelling. Save yourself both age and way by learning repair the vinyl roof on your own. A uncommon supplies and easy steps Testament accept you back on the way again.
Instructions
1. Clean and dry any small tear on the vinyl roof. Cut a piece of aluminum sealing tape, such as A-Seal, and peel off the sticky back.4. Press leaky roof perimeter edges together tightly and seal with Eternabond RoofSeal.5. Coat the repaired area with paint or vinyl sheeting to prevent weathering, decay and rust.
Tape the seams with aluminum sealing tape. Apply Eternabond RoofSeal to the edges of the wrapped cardboard. Place the cardboard over the damaged area on the roof. Cover the entire area with aluminum sealing tape.
3. Repair roof vent leaks by sealing them with RV putty tape or butyl sealing tape. Allow to dry completely. Caulk over the seal to prevent moisture leaks.
Apply to the tear.2. Cut a piece of cardboard and wrap it in aluminum foil to repair a large vinyl roof tear or hole.
