The struts on a 2006 Chevrolet HHR prevent the automobile from bouncing uncontrollably as you coerce. Without struts, the HHR would be burdensome to steer and tread on the tires would wear unevenly. Replacement of the struts can be a soil undertaking as they are located inside the turn wells.
Tools Required
The most conspicuous belongings for this deadweight is a spring compressor, which is used to grasp the strut spring in put during replacement.Remove the cap or comprehend from the strut. Slide the spring compressor into berth so the strut Testament at the end in place while you disconnect it. The spring compressor holds the spring while the remaining strut nuts are removed.
Before lifting the HHR, build persuaded that chocks are placed carry on the tires that Testament stay on the ground. Remove the lug nuts and tire to achievement access to the strut.
Disconnect Strut and Removal
Jack stands along with a jack are used to lift the HHR off the ground and occupation the frame in place while you assignment on the struts. A deluxe establish of hand-tools that admit a ratchet, sockets, wrenches, Allen wrenches, screwdrivers and a crack torque wrench very are required.
Raise the HHR Frame and Remove Tire
End the jack to stand the vehicle and slide the jack stands under the frame near the trundle on which you Testament be working. Remove the nuts that secure the strut. Slide the strut outside from the spring, making sure that the spring compressor is tight enough to hold the spring in place.Installation
Slide the new strut into the spring and tighten the nuts onto the bolts. Remove the spring compressor. Put the tire back on the wheel and hand-tighten the lug nuts. Lift the HHR off the jack stands, remove the stands and lower the vehicle to the ground. Tighten the lug nuts.
