Toyota Corolla Bumper Removal
The Toyota Corolla, cherish most cars on the system nowadays, is equipped with a plastic bumper involve, a foam bumper shock absorber, and a metal bumper that is completely integrated into the frame. This full apparatus forms the bumper. When it is damaged, it is imperative to remove it and transform it with a different encompass and foam shock absorber to arrange the Correct dimensions of safety. Removing a Corolla bumper is the inaugural transaction of the replacement system.
Disconnect the wiring harness that is located on the back of Everyone of the lights and allot them aside for reattachment successive on.
Remove Bumper Cover
Cause a torx bolt screwdriver to remove the multitudinal torx screws construct sorrounding the boundary of the bumper embrace. Remove the screws along the inside of the fender wells headmost and then remove those located along the path of the fender.Remove Lights
The basic system to removing the bumper is to remove any lights, such as backup lights or side marker lenses, that are located on the bumper encompass itself. Appropriateness a Phillips-head screwdriver to remove the inconsiderable mounting bolts on either side of the lucent lenses and then slide the lustrous absent of the bumper embrace.Remove the two bolts at the top of the bumper cover under the hood of the car and remove the two screws holding the bumper cover to the center of the bumper frame itself. Carefully slide the bumper cover off of the shock absorber bumper and set aside.
Remove Shock Absorber
Removing the shock absorber foam is the last part of the bumper removal. In many instances, the foam will simply slide off of the metal frame behind; however, in some cases there are plastic tabs that hold the foam in place. Use a flat-blade screwdriver to slide under the plastic tabs and pop them loose, then pull the foam shock absorber off of the metal frame. You can now inspect the bumper frame for any dents or bends and prepare it for the new bumper.
