Tuesday, June 23, 2015

Pull A Starter On The 2003 Kia Rio

The starter on the 2003 Kia Rio sits near the frame against on the Chauffeur's side of the vehicle. Access to the starter for Emigration is from under the vehicle. The upper intake manifold ease bracket runs under the starter and has to come off before you can access the bolts and connections on the starter. A fresh or rebuilt starter for your Kia Rio is available from most Car parts stores or wound up the parts branch of your Kia dealership.


Instructions


1. Frank the hood and fix the adverse battery cable where it connects to the dissension battery terminal. Loosen the retaining bolt on the cable extreme with a wrench and remove the cable from the battery. Isolate the cable boundary outside from the battery for safety.


2. Position a jack under the front of your Rio and stand the vehicle big Sufficiently to daily grind under it. Column the vehicle on a place of jack stands then pull the jack absent from under the vehicle while you grind. Be positive you are working on solid, Apartment lodgings ground so the vehicle cannot deed while you are under it.


3. Place the upper intake manifold buttress bracket and remove the four bolts that secure the bracket with a socket and ratchet. Establish the bracket and mounting bolts aside for reuse subsequent.


4. Place the wiring harness connections on the back of the starter solenoid, mounted on the top of the starter Engine. Remove the retaining fan from the "b" terminal, the one that looks cognate a stud with a wire and kernel on it, using a socket and ratchet. This one is a traditional push-in style connector. Disconnect the second wiring harness connector by pressing the locking tab in and removing it from the starter. Grasp the connector, not the wires, when you pull it loose or damage to the wires may occur.6.


Slide the wire off the terminal and place it aside.5. Establish the second wiring harness connector.


Remove the upper and lower mounting bolts on the starter with a socket and ratchet. Carefully lower the starter out of the engine compartment and remove it from under the vehicle.